Ametek ® HF-150 & HF-160
¾" Prefilters for many applications

Dynamically sealed, self-cleaning O-rings prevent leakage and clogging

Features

  • Easy to install
  • Reduces dirt, sand, and silt
  • Extends life of household appliances and fixtures
  • Tough, durable, thick-walled opaque and clear housings
  • Service flow rates of up to 15 GPM @ 60 psi (3 psi pressure drop)
  • 3/4"-Inlet/Outlet Housing wrench included with HF-160

  NSF CERTIFICATION

This Component Tested and Certified by NSF International when used with NSF-Certified Filter Cartridges Listed on the Cartridge-Selection Chart

REPLACEMENT CARTRIDGES

Sediment Cartridges - S1

  • 20-Micron (nominal) filtration
  • Made of resin-impregnated cellulose
  • Pleated construction for increased surface area
  • Lasts up to four months

P5

  • 5-Micron (nominal) filtration
  • Density increase from outer to inner surfaces
  • Made of 100% pure spun polypropylene fibers (bacteria and chemical resistant)
  • Designed for purity, corrosion and chemical resistant
  • Lasts up to two months

CW-M

  • 30-Micron (nominal) filtration
  • Polypropylene-fiber cord wound around a polypropylene core
  • Ideal for sediment reduction including sand, scale, and rust particles
  • Lasts up to three months

CW-F

  • 10-Micron (nominal) filtration
  • Polypropylene-fiber cord wound around a polypropylene core
  • Ideal for sediment reduction including sand, scale, and rust particles
  • Lasts up to three months
Accessories:
  • 3/4"-Housing O-ring (OR-34)
  • 3/4"-Housing Wrench (SW-2)
  • 3/4" Brass Fittings Kit (BF-34)
  • Whole House Bracket (UB-1)

Precautions:

WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit.

CAUTION: Filter must be protected against freezing which can cause cracking of the filter and water leakage

NSF CERTIFICATION

    The S1 Cartridge is Tested and Certified by NSF International ANSI/NSF Standard 42 - See performance data sheet for specific claims. The P5 Cartridge is Tested and Certified by NSF International ANSI/NSF Standard 42 - Conforms to material requirements.

 

MODEL#

PART#

CASE PACK

CASE WT.

CASE CU. FT.

CASE DIMENSIONS (L"xW"xH")

UPC 0-51678#

HF-150

151180

6

20lbs.

1.43

16.5x11.25x13.25

51180-0

HF-160

150364

6

20lbs.

1.73

17.25x11.75x14.75

50364-5

CW-MF

155187

12 pr

10.0 lbs

1.02

16.0x10.75x10.25

18772-2

S1

155001

12 pr

9.0 lbs

1.18

17.25x11.5x10.25

00172-2

CW-F

155186

12 pr

11.0 lbs

1.02

16.0x10.75x10.25

18672-5

P5

155014

12 pr

9.4lbs

1.02

16.0x10.75x10.25

01472-1

OR-34

151120

6

0.11lbs

-

9.5x6.5 -envelope

12056-9

SW-2

150295

6

1.3lbs

0.22

12.75x5.5x5.5

29571-7

BF-34

151176

6

1.3lbs

0.06

6.75x5.0x2.75

51176-3

UB-1

151179

6

2.2lbs

0.31

11.5x7.25x6.5

51179-4

PS-2V

151010

4

5.8lbs.

0.31

9.0x8.0x7.5

51010-0

Ace Pump Corporation. 57 W. 21st Street, N.Y. 10010-6858
phone: 212-242-1787  fax: 212-989-2260

©1996 Ace Pump Corporation - New York. Contents contained herein are the sole property of Ace Pump Corp. and may not be reprinted, reproduced or transmitted in any form without written permission. Any purchaser of merchandise from Ace Pump Corp. pursuant to this Internet advertisement agrees that any and all claims and controversies regarding the sale of merchandise to said purchaser(s) shall be subject solely to the jurisdiction to the Court of the State of New York.